Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX918W - Asia - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

NORYL GTX™ 918W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high melt flow. NORYL GTX918W resin may be an excellent candidate for automotive under-the-hood and electrical applications requiring the retention of properties while under thermal load.

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Densité du fondu	924	kg/m³	-
Conductivité thermique du fondu	0.21	W/(m K)	-
Chaleur spécifique du fondu	1920	J/(kg K)	-
Température d'éjection	200	°C	-

Propriétés mécaniques	Valeur	Unité	Norme du test
ASTM Data
Module de traction d’élasticité	62	MPa	ASTM D 638
Allongement à la rupture	53	%	ASTM D 638
Module de flexion	2360	MPa	ASTM D 790
Izod choc avec entaille, 1/8 in	202	J/m	ASTM D 256

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Coeffic. de dilatation therm. linéique, parallèle	80	E-6/K	ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend.	80	E-6/K	ISO 11359-1/-2
ASTM Data
DTUL à 66 psi	188	°C	ASTM D 648
DTUL à 264 psi	148	°C	ASTM D 648

Propriétés diverses	Valeur	Unité	Norme du test
Densité	1090	kg/m³	ASTM D 792

Recommandations pour la transformation Moulage par injection	Valeur	Unité	Norme du test
Pré-séchage - température	95 - 105	°C	-
Pré-séchage - temps	3 - 4	h	-
L'humidité de traitement	≤0.07	%	-
Température de la matière fondue	270 - 295	°C	-
Température du moule	65 - 95	°C	-
Zone 1	255 - 295	°C	-
Zone 2	260 - 295	°C	-
Zone 3	265 - 295	°C	-
Vitesse de rotation de vis	20 - 100	rpm	-
Contre-pression	0.3 - 1.4	MPa	-

Fonctions

Caractéristiques

Transformation

Moulage par injection

Applications

Automobile

Disponibilité régionale

Asia Pacific

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.